Honesty-based: The market is changing, and honesty will never change.

Contact us

Address: J Room, 24thfloor, No.1138, Chang’anRoad, New Jing’an District, Shanghai

anesthesia machine Maintenance

Maintenance of ventilator fuselage
1 should be placed in a ventilated and dry place to avoid direct sunlight
2. It is strictly forbidden to wash with water or let water into machines.
3. Clean the fuselage regularly with soft cloth or cotton
4 No wrestling machine
5. Prohibit the disassembly of machines without authorization
II. Maintenance and Cleaning of Pipelines
1. Attention should be paid to oblique insertion
2. Clean with neutral detergent after use (once a week)
3 Pipeline should be hung in a dry and ventilated place when not in use
4 Pipeline is plastic material, not close to high temperature
5 Avoid sharp scratch
6 Pipelines are consumables and should be replaced in time for a period of use
III. Maintenance and Cleaning of Nasal Masks
1 Nasal mask should be placed in a dry and ventilated place when not in use
2. Clean with neutral detergent after use (once every two days)
3 headbands should be cleaned in time, using neutral detergent (once a month)
4 Nasal mask is made of silica gel and can not approach high temperature.
5 Avoid sharp scratch
6. Nasal mask is consumable material. It is found to be oxidized and hardened during a period of use. It should be replaced in time when it is not suitable for use.
IV. Use and Cleaning of Filtration Membranes
Check once a week whether the filter is blocked by dirt or leaks. If the filter is dirty, the filter should be replaced in time to prevent insufficient air from ventilator.
Normally, the filter membrane is replaced every three months (if the working environment of the machine is dirty, it can be replaced more frequently).
3. Use your hands to gently pop up the dust inside.
4. It is suggested that filter membranes should not be frequently cleaned and reused.
Maintenance and cleaning of humidifier
1 Suggestion to change water every day
Pure water is required for all humidifiers to prevent fouling. If scale occurs in the wetting tank, the scale remover or white vinegar can be poured into the wetting tank, and the water can be filled to soak and rinse out.
3. Dry the bottom of the constant temperature humidifier after water injection. It can't be moved casually to prevent short-circuit of water intake.
When you are not in use, you should pour out the water and dry it.
5 Before using the constant temperature humidifier, check whether there is water in it. Note that the water level should not exceed the * water level, but also not lower than the * water level.